|Наборы AMECOIL подходят для операций техобслуживания на производстве и восстановления дефектной резьбы в различных секторах промышленности.|
|AMECOIL® SR kits are indispensable for repairing all types of defective tapped holes. Regular workshop kits, they are necessary for the factory servicing and maintenance departments.|
Stainless steel 18.8
AISI 304 (1.4301)
AISI 302 (1.4310)
|- Dry lubrication
- Cadmium plating
- Silver plating
- Zinc plating
|All normal applications in all materials|
|Special stainless steels:
AISI 304L, 316, 316L, 316Ti, 321
|Up to 400°C
Resistance to acids, corrosion, high temperatures – non-magnetic
|Cadmium plating||Copper parts.
High resistance to some electrolytic couples.
|Inconel x 750
Nc 15 Fe Nba
|750°C (peak)||Silver plating||Thermal power plants
Nc 20 C. 18Ti
|BEFORE AFTER||The thread insert is fitted by screwing it on to the AMECA instrument threaded pin, with a knob or handle, until the drive hooks on to its end. Screw the assembly into the threaded hole until the insert is completely in, then turn by 1/4 or 1/2 turn.||Either with the handle
Or with the knob
(up to diameter M8)
The advantages - CAN BE USED:
for a first installation, for repair, for reworking
|• Cannot come loose
The outer diameter of the AMECOIL® SR thread insert has a larger diameter than that of the threaded hole. Adhering strongly to the threaded hole, it can practically never come loose once installed.
|• Resistance to corrosion and other threats
The AMECOIL® SR thread insert prevents deterioration of threads due to pulling, vibration, fatigue, seizing or corrosion while resisting the highest temperatures.
|• Regular distribution of loads|
|• Reduction of bosses|
|• Resistance to premature wear|
|• Simplification of locking systems|
From +0.1 to +1 mm of the nominal diameter of the screw.
Performed with the AMECOIL® tap.
Using the tools of the conventional series or those of the new series, for even quicker installation.
Using the threaded pin of the AMECA tool, fitted with a handle or knob.